Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Tulsa Homeowners
A chimney can look fine from the living room and still be hiding a cracked flue, a failing crown, or a heavy creosote load that turns a normal fire into a chimney fire. An inspection is how you find those problems before they find you. Our technicians have up to 10 years of experience, and we look at the whole system: firebox, damper, flue, cap, flashing, and the masonry around it. In Tulsa, where freezing nights follow warm afternoons all winter, the freeze-thaw cycle works on mortar and crowns, and a small crack can open into a real leak. We schedule inspections across the city, often same-day when our calendar allows. Call (833) 712-5506 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
Fireplace Inspection is the close look at the parts you actually use: the firebox, the damper, the smoke shelf, and the first stretch of flue above the fire. You need one any time you move into a house with a fireplace, after a chimney fire, or when smoke backs into the room instead of going up. It’s also the sensible starting point if you can’t remember the last time anyone looked. At Tulsa Chimney Cleaning, we check for cracked firebrick, a damper that won’t seat, gaps in the mortar joints, and creosote buildup near the smoke chamber. A basic fireplace inspection in Tulsa typically runs $100 to $250 depending on how much of the firebox needs close attention. We work on the fire-safety system as a whole, not just the visible brick. Call (833) 712-5506 for an exact quote; estimates are free.
What We Look At Inside the Firebox
Firebrick cracks wider than a hairline, loose mortar joints, and a damper that doesn’t close fully all change how a fire burns and where smoke goes. We note each one and tell you which can wait and which shouldn’t. Nothing gets recommended without a photo you can see for yourself.
When Backdraft Smoke Signals a Problem
Smoke rolling into the room usually points to a blocked flue, a flue that’s too small for the opening, or negative pressure in a tight house. We measure the flue and check the smoke chamber before suggesting anything. Sometimes the fix is a good sweep, not a rebuild.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the full system from the firebox to the top of the crown, and they’re what separates a real evaluation from a quick glance up the flue. You want one before you buy a house with a wood-burning appliance, after any chimney fire, and once a year if you burn regularly. Our Tulsa Chimney Cleaning team offers sweeping, repair, and inspection from one specialist, so you’re not juggling three contractors who each see a different piece of the puzzle. We check the cap, crown, flashing, and masonry in addition to the flue, and we use Gelco and Famco caps and flashing components when something needs replacing. A full inspection in Tulsa generally runs $150 to $400 based on system size and access. Call (833) 712-5506 for a free estimate.
What the Standard Visit Covers
We look at the firebox, damper, smoke chamber, flue, cap, crown, and the roof-level flashing. The flue gets checked for creosote, cracks, and obstructions. You get a written report with photos, not a verbal shrug.

Separating Repair Needs From Cosmetic Wear
Not every hairline crack in a mortar joint means rebuilding. We sort findings into what’s safe to monitor, what should be fixed soon, and what needs attention before the next fire. That keeps you from paying for work you don’t need.

Chimney Flue Inspection
Chimney Flue Inspection focuses on the inside surface of the flue, the channel that carries smoke and carbon monoxide out of your house. It matters most when you’ve had a chimney fire, when you’re switching fuels or appliances, or when you notice a strong creosote smell or smoke staining. The flue is where problems hide, because you can’t see it from the hearth. We run a camera the length of the flue and check for cracks, gaps at the tile joints, and heavy glazed creosote that a brush won’t remove. When the flue liner is damaged, we specify DuraFlex or Olympia Chimney liner systems because they’re built for the job rather than adapted to it. A flue inspection in Tulsa typically runs $150 to $350. Call (833) 712-5506 for your exact quote.
Clay Tile Versus a Metal Liner
Older Tulsa homes often have clay tile flues, and tile joints can shift as the house settles or the masonry moves through freeze-thaw. A camera run shows whether those joints are still tight. Where they aren’t, we explain the liner options honestly, including when HeatShield resurfacing can restore a liner without a full reline.
Creosote Grades and What They Mean
Light, flaky creosote sweeps out with a standard brush. Glazed, tar-like creosote is a different problem and it’s the kind that fuels chimney fires. If we find it, we tell you plainly and lay out the removal options.
Chimney Fire
Chimney Fire damage isn’t always obvious from the outside, and that’s exactly why a post-fire inspection matters. A chimney fire can crack tiles, warp a damper, and open gaps in the mortar that let heat reach framing. You need a professional look after any chimney fire, even a small one you think you put out yourself, before you light another fire. We inspect the full flue and firebox, check the cap and crown, and use a camera to confirm the liner is intact. If it isn’t, we can talk through relining. Post-fire inspection in Tulsa usually runs $200 to $450 depending on the damage and whether a camera run is needed. Skip it and you’re trusting a flue you can’t see. Call (833) 712-5506 for a free estimate.
Telling a Chimney Fire From a Normal Burn
A chimney fire often sounds like a low roar or a train passing, and it can send flames or dense smoke from the top. It leaves puffy, honeycomb-textured creosote and cracked tiles behind. If you suspect one happened, don’t burn again until it’s checked.
Why Carbon Monoxide Follows a Compromised Flue
A cracked flue or a gap at the tile joints lets combustion gases escape into the house instead of up and out. That’s the risk people underestimate. An inspection confirms the flue is sealed end to end, and a working carbon monoxide alarm in the home is a sensible backup.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the camera-based evaluation you need for a real estate transaction, after a chimney fire, or when you’ve changed the appliance or fuel type. It goes beyond the basic visual check and looks at every accessible part of the system, including the flue interior and the attic and roof areas where the chimney passes through. Our technicians have up to 10 years of experience reading what the camera shows and what it doesn’t. In Tulsa, this is the inspection home buyers ask for most, because it gives them a documented record before closing. A Level 2 inspection in Tulsa typically costs $200 to $450 based on roof access and system length. It’s the one inspection that catches hidden flue damage. Call (833) 712-5506 for a free estimate.
Real Estate and Pre-Sale Inspections
Buyers want evidence, and a Level 2 inspection delivers it with photos and a written summary they can hand to their agent. It also protects a seller, who can fix a known issue before it becomes a negotiation. We keep the report clear and specific.
Camera Access Through the Cleanout and Roof
We reach the flue through the cleanout and, when needed, from the top, and a camera run confirms what’s really inside. Roof access is part of the job, and we take the time to do it safely. Height work is exactly why this is a trained technician’s task.
Chimney Leak
Chimney Leak damage shows up as stains on the ceiling or chimney breast, crumbling mortar, or a musty smell after rain, and it’s almost never coming from where you’d guess. Water usually enters at the crown, the flashing where the chimney meets the roof, or a cracked cap, not from the flue itself. You need an inspection when you see those stains or when a heavy rain leaves damp patches near the chimney. We check the crown, flashing, cap, and masonry joints and tell you where the water is actually getting in. We install Gelco and Famco caps and flashing components because hardware-store parts don’t last in Oklahoma’s weather swings. A leak inspection and diagnosis in Tulsa generally runs $150 to $350, with repair quoted separately. Call (833) 712-5506 for a free estimate.
Flashing, Crown, and Cap Failures
Flashing failures show up first at the roofline, where a small gap lets water behind the masonry. A cracked crown holds water on top and lets it seep down through the flue. A missing or damaged cap lets both rain and animals straight into the flue.
Why Water Damage Gets Worse in Winter
Water that soaks into brick or mortar expands when it freezes, and in Tulsa’s winter that cycle repeats and widens the cracks. A leak you can live with in October is a bigger problem by February. Patching it before the cold sets in is the cheaper path.
Chimney Camera Inspection
Chimney Camera Inspection is the video run through the flue that shows you exactly what’s inside, and it’s the part of an inspection people find most convincing. You need one when a sweep or a basic look turns up something suspicious, after a chimney fire, or when you’re buying a home and want proof of flue condition. We send a camera the full length of the flue, record what we see, and walk you through the footage so nothing is hidden. If the liner is damaged, we can specify DuraFlex or Olympia Chimney liner systems and quote the repair in writing. A camera inspection in Tulsa typically runs $150 to $400 depending on roof access and flue length. Call (833) 712-5506 for an exact quote; estimates are free.
What the Footage Shows
The camera reveals cracked tiles, gaps at the joints, offset flue sections, and glazed creosote you’d never see from below. It also confirms whether an existing liner is still sound. We show the footage rather than just describing it.
When a Camera Run Is Worth It
If the flue is straight and clean, a camera run may not add much, and we’ll say so. It’s worth it when there’s a fire history, a suspected leak, or a real estate transaction. That’s where the footage earns its keep.
Brands We Service
We work with professional-grade industry brands rather than off-the-shelf substitutes, and that shows in how we service them. DuraFlex and Olympia Chimney liner systems are built for demanding relining work, and we know where those systems wear and how they should seat. HeatShield resurfacing is a trade-level restoration method, and we use it where it extends liner life without a full reline.
Gelco and Famco caps and flashing components are what we install for long-term weather and animal protection, because they hold up better than generic hardware. Copperfield products round out the lineup. Whether you have Copperfield or any other make, we can help, and we’ll tell you honestly what’s worth repairing and what’s worth replacing.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A fire that won’t draw usually means a blocked flue or a smoke chamber problem. It won’t fix itself with a hotter fire.
- Creosote smell or dark staining. A strong, tar-like smell or black stains near the damper point to heavy buildup. Glazed creosote is the kind that feeds chimney fires.
- Water stains near the chimney. Damp patches after rain mean a leak at the crown, flashing, or cap. Left alone, winter freeze-thaw widens the damage.
- A chimney fire, even a small one. Any fire you suspect should trigger an inspection before the next burn. Hidden tile cracks are common after one.
- Visible cracks or crumbling mortar. Loose brick, missing mortar, or a damaged crown lets water in and weakens the structure. Better to catch it early than after a bigger repair.
Our Process, Step by Step
- 1
Book the visit. You call (833) 712-5506, tell us what’s going on, and we set a time. Sweeping and inspection go together, so we plan the sweep up front rather than quoting it after the fact.
- 2
Protect the room. We lay drop cloths and keep the workspace tidy before any tools come out. A good inspection shouldn’t leave a mess in your living room.
- 3
Inspect the full system. Firebox, damper, smoke chamber, flue, cap, crown, and flashing all get checked. Where the flue needs a closer look, we run the camera and record it.
- 4
Show you the findings. We walk you through the photos and footage and explain what’s safe, what’s cosmetic, and what needs repair. No pressure, no guessing.
- 5
Give you a written estimate. Any repair is quoted in writing before we start, at a flat price agreed in advance. Nothing happens without your say-so.
How Much Does Chimney Inspection Cost in Tulsa?
Chimney inspection in Tulsa typically costs $100 to $450, and the exact figure depends on the level of inspection and how much access the system needs. A basic fireplace inspection usually runs $100 to $250. A full inspection across the flue and roof is generally $150 to $400, and a Level 2 inspection with a camera run is usually $200 to $450. Post-fire and leak-diagnosis visits land in the same range, and any repair is quoted separately in writing.
What moves the price: the type of inspection you need, roof access, flue length, and whether a camera run is part of the visit. A system that hasn’t been checked in a long while sometimes needs a sweep first, and we plan that into the booking so you’re not surprised later.
How to avoid overpaying: ask for the inspection level up front, ask for photos and footage, and ask whether the recommended repair is urgent or can wait. Our estimates are free, flat-price, and agreed before booking, so the written estimate sets the final price. Nothing gets recommended without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait. Call (833) 712-5506 for an exact quote.
Our Service Area Near Tulsa
We inspect chimneys across Tulsa and the towns around it. If you’re in Catoosa or Turley, we’re close by. We also serve Jenks, Owasso, Bixby, Sand Springs, Glenpool, Sapulpa, Skiatook, Verdigris, and Collinsville. Typical response times depend on the day and the season, and booking ahead during the fall rush helps. Call (833) 712-5506 to check availability for your address.
Serving Tulsa, OK – Our Local Coverage Area
We serve Tulsa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Tulsa
A chimney inspection is a professional evaluation of the full system, from the firebox and damper to the flue, cap, crown, and flashing. It looks for creosote buildup, cracks, blockages, and water damage you can’t see from the hearth. We back findings with photos and camera footage. Call (833) 712-5506 for an exact quote; estimates are free.
A standard inspection usually takes about 45 minutes to an hour, and a Level 2 with camera and roof access often runs a little longer. If we add a sweep to the visit, plan on more time. We’ll give you a realistic window when you book.
Most inspections in Tulsa run $100 to $450 depending on the level and access, with a Level 2 typically $200 to $450. Any repair is quoted separately in writing. The written estimate sets the final price. Call (833) 712-5506 for an exact quote; estimates are free.
Yes. We work with DuraFlex and Olympia Chimney liner systems, HeatShield resurfacing, and Gelco and Famco caps and flashing, along with Copperfield products. We know where those brands wear and how they should be installed. Whether you have one of these or any other make, we can help.
Often, yes, when the schedule allows. Call and we’ll tell you the earliest opening. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening.
Our work is backed by a satisfaction guarantee, and repairs are quoted in writing before we start. The written estimate is the record of what’s covered on your job. Ask about the specifics when we give your estimate, so there are no surprises.
Clear the area around the fireplace and hearth so we have room to work, and hold off on a fire for a day before the visit. Make sure we can reach the roof if roof access is needed. If you know the fire history or any past repairs, mention it when you book.
Schedule Your Chimney Inspection Service in Tulsa Today
Don’t wait for a stain on the ceiling or a chimney fire to get your system checked. Book an inspection with Tulsa Chimney Cleaning, and we’ll show you exactly what’s going on inside your flue with photos and footage. Estimates are free and there’s no obligation. Call (833) 712-5506. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Tulsa Chimney Cleaning.