Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Sapulpa, OK
We provide independent Gelco service across Sapulpa, handling caps, top-mount dampers and flashing with quality parts that match the original fit. What makes our Gelco work different here is that many Sapulpa chimneys weren’t built for the wood they’re burning today, so a cap sized off the visible masonry top often fits the wrong opening. We check the actual flue before anything gets installed. Call (833) 712-5506 for a free estimate.

Why Sapulpa Residents Choose Us for Gelco Service
Gelco chimney caps are common on Sapulpa roofs because they hold up well and fit a lot of flue configurations. That also means we see plenty of them, worn and weathered, which is where familiarity pays off. We know how these caps seat, how the screens attach, and where the mounting legs tend to work loose after a few Oklahoma winters.
We’re an independent shop. We aren’t affiliated with or authorized by Gelco, and we don’t claim to be. That independence is a good thing for Sapulpa homeowners: we can tell you plainly when a cap needs repair and when it’s past saving, without a factory script in the way. Cap Replacement, Multi-Flue Cap and Damper Repair are the three jobs we run most often on Gelco equipment here.
Scheduling is straightforward. You call, we book a time, and the estimate is free. Our technicians have up to 10 years of experience with chimney systems, and every job is inside that focus. We don’t do roofing or HVAC, so nothing about your Gelco cap gets treated as a side project.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Sapulpa
- Rust-through and seam separation on Gelco steel multi-flue caps. Oklahoma’s humid summers and freeze-thaw winters are hard on painted steel. Water gets into a seam, freezes, opens it a little wider, and repeats until the panel rusts through. On a Sapulpa multi-flue top, that’s usually visible as streaking down the brick before you notice it from above.
- Seized top-mount damper linkage. Heavy burning during ice-storm season loads the linkage with creosote and soot. Left alone, the damper sticks partway open or won’t close at all, which costs you heat and lets cold air down the flue. We free the linkage, clean the mechanism, and confirm it travels fully.
- Loose or lifted cap screens and mounting legs. Wind and years of thermal movement work the fasteners loose. Once a screen lifts, rain, birds and debris get into the flue, and creosote problems get worse because moisture is now part of the picture. Re-seating the cap and screen is one of the simpler fixes we do in Sapulpa.
- Corroded or poorly seated flashing where a Gelco cap meets cracked masonry. Sapulpa’s older brick chimneys crack with age and thermal cycling. If the flashing no longer seals against that brick, water runs into the clay tile liner. We re-seat the flashing against sound masonry and flag any crown or brick issues that need attention first.
- Caps sized to the masonry top instead of the flue. This comes up a lot in Sapulpa’s pre-1950 homes, and it’s the one that causes draft complaints. A cap that fits the brick perfectly can still be wrong for the flue underneath. More on that below.
Gelco Service in Sapulpa: What Local Conditions Mean for Your Equipment
Many pre-1950 Sapulpa flues were built for coal and later converted to wood, so the original opening is often undersized or unlined. That’s the fact that shapes most of our Gelco work here, and it’s why a cap sized to the visible masonry top may not match the actual flue and can choke draft. A homeowner in an older bungalow near the heart of Sapulpa notices smoke rolling back into the room or a rusted cap sagging over a multi-flue top after a winter of heavy burning. The usual cause is a coal-era flue converted to wood, where the cap was fitted to the old brick footprint rather than the real flue opening, plus creosote and soot narrowing the passage. A qualified local pro inspects the liner, sweeps the flue, checks damper travel, and fits a correctly sized stainless cap so draft and water shedding are restored. Sapulpa’s freeze-thaw cycles make all of this worse, because a draft-starved flue builds creosote faster with every intermittent fire.
Gelco Models & Products We Service in Sapulpa
We service the Gelco products that sit on Sapulpa roofs: single-flue caps, multi-flue caps, top-mount dampers, and chimney flashing and crown assemblies. When something needs replacing, we use Gelco-compatible parts where they match the flue size and the original fit. Where the original gauge or finish won’t hold up to Sapulpa’s moisture, we switch to quality aftermarket stainless, because a part that rusts out in a few seasons isn’t a fix.
We aren’t a Gelco dealer and we don’t describe ourselves as sales and service. We repair, install and service Gelco equipment with parts that fit it. The up-link for our Gelco work explains how we approach the brand if you want the longer version.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Sapulpa
Gelco service is priced per job, and the written estimate sets the final price. Typical ranges:

- Chimney sweep: $150 – $300
- Level 1 inspection: $100 – $200
- Level 2 inspection (camera): $200 – $500
- Single-flue cap replacement: $175 – $400
- Multi-flue cap replacement: $300 – $700
- Top-mount damper repair or replacement: $250 – $600
- Flashing re-seat or repair: $200 – $550
Cost moves with flue count, access to the roof, and whether the cap or damper is sound enough to repair. The free estimate includes a look at the cap, the damper travel and the liner, and we’ll tell you plainly when work can wait. Call (833) 712-5506 for an exact quote.
Serving Sapulpa, OK – Our Local Coverage Area
We serve Sapulpa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Sapulpa
Yes. A multi-flue cap can go on an older Sapulpa brick chimney, but only after we measure the actual flues, not just the brick footprint. Coal-era conversions often have irregular flue openings, so we check each one and size the cap to the real passage. From there we confirm the mounting legs seat on sound masonry.
Creosote and soot collect on the linkage during heavy ice-storm burning, and the mechanism seizes. A stuck damper usually means the flue was doing more work than the linkage was cleaned for. We free it, clean it, and check travel. If the linkage is too far gone, we’ll say so.
Repair if rust is surface-level and the seams are intact; replace if the steel has rusted through or seams have separated. In Sapulpa’s climate, a cap already showing rust-through rarely repaints well enough to last another winter. We’ll show you what we see before recommending either way.
A Level 2 inspection is worth it when the flue itself is in question, especially on Sapulpa’s older converted coal flues. Caps and dampers get replaced on a Level 1 look; the deeper inspection is what tells us whether the liner behind them is sound. Nothing gets recommended without camera evidence you can see for yourself.
Often, yes, if the leak is coming past a loose cap or failing flashing. If water is entering through cracked masonry, a bad crown, or a compromised liner, a cap alone won’t fix it. Call (833) 712-5506 for a free estimate, and we’ll trace the actual entry point.
Service Areas Near Sapulpa
Along with our Sapulpa work, we take Gelco cap and damper jobs in the neighboring towns around the corridor, including Glenpool, Jenks, Tulsa, Bixby and Owasso. Same hands-on approach across the area. Call to book a free estimate wherever you are nearby.
Book Your Gelco Service in Sapulpa Today
Whether it’s a sagging multi-flue cap, a damper that won’t close, or flashing that’s letting water into cracked masonry, we’ll take a look and give you a straight read. Call (833) 712-5506 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Tulsa Chimney Cleaning.